These are dividers the Ikea kitchen bamboo drawer inserts. There are 2 sizes, one for the narrow inlay, and one for the wide inlay. These are the only 2 sizes I had at hand to make the model. If any other sizes are required I would glady modify the model, or feel free to remix this model to suit your needs.
I used double sided tape to stick the divider into the inlay.
I printed these with a 0.4mm nozzle, 15% infill, with the input shaper speed profile in Prusaslicer. Print them standing up, then no supports should be needed.
The author marked this model as their own original creation.
