Even though the Original Prusa MINI+ is a compact printer, sometimes you might feel it takes up a little more space than is necessary. We came up with a solution, a relatively simple printed add-on that gives your MINI+ a bit of a majestic presence, while actually saving space and neatly organizing the extras your MINI+ needs, all at the same time.
This four-legged beast is designed not only to look cool, but also to provide maximum functionality and storage space for all the goodies mentioned above.
Please note that you are installing this add-on at your own risk. Any problems or damage caused by the installation are not covered by the warranty.
Also, please note, that before packing and shipping the printer for repair, this add-on has to be fully uninstalled.
Material: a combination of Prusament PETG Prusa Orange and Prusament PETG Jet Black.
Total weight: 708 g
Total printing time 4d 0h 16m
full article about Prusa Mini Base you can find on blog:
https://blog.prusaprinters.org/enter-the-mini-base_50290
Buy Original Prusa Min i+:
https://shop.prusa3d.com/cs/66-original-prusa-mini
Buy Prusament PETG:
https://shop.prusa3d.com/cs/23-petg
The author marked this model as their own original creation.