I got tired of the small cup holders in my 2023 RAM 2500 Limited. So I designed a larger replacement.
4
19
0
485
updated November 2, 2023

Description

PDF

This was designed to fit in my 2023 Ram 2500 Limited.  I don't know which other years/models it may work with.  It's my understanding the sliding center console is slightly deeper on the Limited than on others.

I printed this in ASA.  It was too big to print all at once, so I split it in half.  After printing I used acetone to glue the two halves together.  (If you have a larger printer, you should be able to import and print the left and right halves as one part.)

All parts except for “front” should be able to be printed without support.  Some screw holes may have one layer covering the hole for mechanical support.  These can be punched through with a screw after printing.

The latching mechanism for the sliding center console will need to be removed from the existing cupholder and reused here.  Several button head M3 screws will be needed to complete assembly.

The “back” and “bottom” pieces are optional and only serve as additional mechanical support holding the two halves together.

Model origin

The author marked this model as their own original creation.

License