Voron Switchwire Auxillary Fan (Dual 5015s)

Adjustable auxiliary fan that helps improve your part cooling and thus allows you to print faster (PLA for example).   I mounted mine using two modified “z_bearing_blocks" which are included using the adjustable height v2 lid which incorporates the Keyback retention.  If you need some help or adjustments made, please feel welcome to comment and @ me so that I get notified.

Recommended settings:

• PTEG (ABS / ASA preferred) for the fan housing to help hold up to any heat coming off the bed.   PLA will work, but will eventually warp over long term use.
   
• PLA+ is fine for the lid.   
   
• 15% Gyroid infill and 0.2 layer height is what I used and can verify works well