Hello Makers,
i saw the video of the game at the beginning on Instagram and was immediately impressed. No further words are needed. Unfortunately I couldn't find a finished model to reprint, so I simply designed it from scratch myself.
Material List:
Print settings:
You need to print:
Print settings:
Instructions:
The mechanism is the important part here.
He has to run well and still only have a little play.
So if it doesn't fit exactly, it can be reworked as shown in the video. Simply shorten and file until it fits perfectly :)
When gluing, it is best to clean the surfaces to be joined with IPA. If you use PLA like me, use the Ruderer L530 glue. This welds the parts together.
Remove excess glue with a cloth and IPA.
The screw is then simply screwed in. Of course with feeling. Optionally you can also attach some of the glue between the pin and cap. The only important thing is that very little should be used here, as leaking glue can become a problem ;) Of course, this should only be done if you are happy with the mechanism.
The Ball:
That's it :)
If you want the Fusion 360 file or the trail without logo: https://cults3d.com/en/3d-model/game/infinite-loop-agility-ball-game
Find this Project on Instructables: https://www.instructables.com/Infinite-Loop-Agility-Ball-Game-1/
Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.