Board Game Turn Table

I played my first game of Wingspan over the weekend and loved it, but noted having a turntable for the dice tower would be great.

I also realized it would work great for a few of my other games like Splender or Dominion.

It's not perfect, and could probably be improved, but I posted as .step files so the community can edit as needed. The current iteration uses a 608 bearing in the center and #8 - 32 .5in

amazon link to screws 

amazon link to nuts

 (4mmx12mm for you metric folk) countersunk screws and nuts to hold everything together. The parts are large to allow for 12 card slots and need a large print bed. I designed it specifically for the Bambu labs printer beds. When building the optimized version build two halves first then put the two together with the bearing in the middle. 

There are two versions. 
One that needs no supports, but requires printable braces and 24 screws. 
The second is more optimized and only requires 12 screws, but needs support on the bottom sides of the screw slots. It's a flat surface, so should be pretty easy to support. 

There is a circular mount to print and place the turntable on, but I also modeled a full Stagetop play tile to mount to the turntable and work seamlessly with the Stagetop system. 

I left the center open to allow for custom inserts for specific games if that's desired.