Moon City 2.0 LED-Tealight Expansion

As the MOON CITY 2.0 creation by Kijai

https://www.printables.com/de/model/218224-moon-city-20/comments

is very well known here is a little LED tealight stand for the modell. It is an oval plate with a center hole matching the tealights diameter. The standard diameter is 37.6mm. Simply adjust the size in your slicer to match YOUR tealights diameter. Make sure it sits tight our the tealights body. 

Works well. Have fun!

Material: PLA
Layerheight: 0,2mm
Infill: 20%