Pandemic Inset Box

When we bought our Pandemic game, there was a huge amount of loose plastic bags contained carrying all items like cards, figures, virus cubes and so on (refer to attached pictures). Storage of all the items in this plastic bags took some minutes after each game (also for setup of each game) and so I wanted to get rid of this chaos (and to reduce the amount of damaged plastic bags after several played Pandemic games).

→ I designed one inset box for all loose parts (and some of the additional cards; infection and player cards are stored in the original box at the common storage place, all other items and cards are stored within the inset box):

Placing of the inset boxe in the original Pandemic box (German version, might also fit in other language versions):

On one side of the box the infection and player cards are stored. On the other side of the box the inset box with all remaining cards and tools is to be placed. The gameboard and instruction can be placed on top. The inset box is created to have no contect to the instruction / gameboard.

Advantages:

Fast and easy setup before every new round, directly out of the game package. The sorting of all items after each Pandemic round takes now less time and the amount of plastic is reduced to zero (besides the used filament ;-)).

Print Instructions (tested without any issues):

Print orientation as shown in the attached STL file

PLA

0.3 mm

30% infill

No support

In case you want to configure or adapt the boxes for yourself, I have also attached my configurable SCAD file. Commercial usage is not allowed (also not for adapted inset boxes, that is based on my files)!