Honeycomb Front Cover

Front Cover for Prusa MKS3(+) to replace the emptiness of a missing LCD Display at the printers front.

For install I used the 4x M4 screws which were used for the LCD before. 

1. print the 5 pcs. (1x Cover & 4x Screw caps).
2. install the 4 screw caps with the 4 screws from Prusa LCD Display. Hold the screw cap with a pliers.
3. insert I drop of glue in each the 4 holes on the backside of the cover. 
4. press the cover with the holds onto the 4 screw caps.