Gridfinity Tiles

Now available: The clip together grid shown in the pictures of this model: https://www.printables.com/model/633086-gridfinity-clip-together-baseplates

------------------

Gridfinity Tiles.

I have quite a lot of drawers equipped with Gridfinity baseplates so I can put Gridfinity boxes in them.

But sometimes I don't have a grid filled yet and stuff gets into the open grid. So I made these Gridfinity Tiles. You can use them to fill empy spaces in your baseplates so stuff will not fall inside and you have a nice cover if you want to place some bigger item next to your bins, but still have the option to put bins in these places later.

Just print the tiles you want and place them in a Gridfinity baseplate. Gravity should hold them down nicely. In case you want to have the a more secure grip you can glue in 6x2mm magnets on the bottom of the tiles.

For printing the top of the tile is oriented down so you can give your tiles nice smooth or textured finishes.

From the empty bin only the bottom part is used to be compatible to the Gridfnity system.

I designed the upper tile part myself.