Samsung Galaxy A14 case

Works well

Thank you

I just started a clear red petg one and so far there is no problems

Print .5% bigger for pla it will be a tight fit

Scale x and y to 100.5 or it will split when you put it on. I recommend PETG for a little bit of extra flex.

Printed PLA, fits perfectly!

Printed it in tri colour PLA while I wait for my TPU to arrive. Gotta say. It’s pretty nice.

Printed in holographic PLA with 50% cubic infill.
To get the pattern I removed the bottom layers in the slicer.
I used tinker cad to add a small relief bevel in each corner to aid in installing the phone without splitting the PLA layers.

The design is spot on and the fit is perfect. TPU will make installation easier without modifications, but I love the look of this PLA.

Turned out really well using black overture tpu. Only issue I saw was that the hole on top of the phone didn't line up with the A14 case

I added a Jordan logo on the back for funsies and the black and white contrast looks amazing! (edited)

TPU 98A with speed max. 20 mm/s was all right. No Kores aplied to bed but no problem surprisingly.