Gridfinity case for Shaviv Deburring tool set

A Gridfinity compliant tool case with custom designed inserts to store the Shaviv classic handle A with the B deburring blade holder/shaft along with the F countersink blade holder/shaft and two countersink blades (F12 and F20 in my case). The tool slots are a snug fit but also allow easy extraction of the tools. The 2x4 Gridfinity magnet light baseplate is printed separately and press-fit into the lid (you might have to sand/shave the edges a bit for an ideal fit). The custom insert for the lid is held by 6x2mm magnets. The hinges and latch require 6 M3x30 socket head cap screws.

For those who would like to add a decorative logo to their case, I also included a ready-to-print layout sheet for Avery 22822 glossy 2x3 printable stick-on labels. Just make sure you print at 100% scale.

I used the 4x2 files of PjotrStrog's box+lid and the 2x4 files of RIP_Plo-Koon's magnet light baseplate: those are unchanged from their original design. The parts I designed are the custom box and lid inserts for the handle, F holder and countersink blades.