HSW - LARGE shelf bracket with LED strip slot

0"I created a larger shelf bracket for the honeycomb wall. This is simply just a triangle with pegs that fit into the standard empty-inserts. I was going to follow suit to the other remixes and add in more honeycomb slots as infill. however, I found this to not be so functional as you need to lift up out of most wall attachments and having the shelf directly above does not leave much room for this.

each shelf has 4 pegs each of which I designed to be a VERY tight fit, i did this intentionally to make everything more secure. I am able to brute force the empty inserts onto the pegs by hand but depending on your printer tolerances you may need to sand/grind or use tools to force the empty inserts into place. 

I designed the bracket to sit 1.8mm above the top slot. so it should fit flush with the standard honeycomb wall and also this one with borders.

https://www.printables.com/model/513677-honeycomb-storage-wall-with-borders

I am able to fit two of these on my print bed (you will need about 9"x9") laying on the side, I noticed that the corners will want to lift up a bit, so make sure to use an outside brim and also bed adhesive.