Simple mini guitar model with stand

It's exactly the case where you use someone's basic model that's brilliantly simple and then it starts. :) A simple model suddenly becomes a miniature of a musical instrument.

The total size of the guitar is 22.5 cm.

Everything is glued by Super glue.

The holes in the bridge are drilled at an angle with a drill with a diameter of 1 mm. The holes in the head of the guitar neck are also drilled with a 1 mm diameter drill bit, but through the glued part for guiding the strings.

Plus, you only need fishing line and a few pins for string tension pins.

In my opinion, it is very important to use a suitable filament, in my case it is used for:

• Mini guitar top: PLA+ WOODJet - Natur by PM
• Rest of parts + stand: PLA - Brown by PM

Redesigned guitar bridge and headstock to add strings. Custom made elegant stand.