Pokémon Pokéball Beltclip

This model is a beltclip for the Poké Ball from "kriswillcode" https://www.printables.com/de/model/166243-pokemon-poke-ball 
 

The hooks on each side could be used for a rubberband or similar as a secondary safety.

2 Parts:

1. Beltclip
2. Pokéballholder

Design is made for a ball with a 58mm wide and 4mm high middlepart. 

Both part can be printed parallel with a layer height of 0.2mm or less. The part must be joined and the little barb (pic 4) hold them together.