Soup Can Trophy

This is a trophy which was created to have a standard soup or chili can to be used as the body of the award. However the design also allows for the upper and lower part of the trophy to be assembled with a M3 x 30 mm. long screw.

To assemble you will need a few items:

3 x M3 nuts

2 x M3 x 15 mm long screws

1 x M3 x 15 mm long screw to mount the Upper Base to the Award Riser

or

1 x M3 x 30 mm long screw to mount the Lower Base and Upper Base to the Award Riser.

Post-Printing

During the Post-Printing I gave all the pieces a coat of primer, then painted the bases brown and the Award and Award Riser gold. Lastly, I gave each piece a clear lacquer finish.