This is a bracket to hang small float switches (water level sensors). I use it to hang from a glass baffle in my sump. Can also hang from a bare aquarium wall.
It is customizable in Autodesk Fusion 360 (free hobby version):
- depth
- width
- neck diameter of your switch
- number of clips
- glass thickness
To customize:
- open the .f3d file in Fusion 360
- Solids panel → Modify → Change Parameters
- modify any of the values, changes should be reflected immediately
- File → Export → export a .step file
- open the .step file in your slicer and print
To print
- print on its side with clips opening upwards
- organic supports if your slicer supports
- 0.3mm layer height is fine
- I used PETG as seems safer for aquariums
Tags
The author marked this model as their own original creation.