Creality K1 Filament Sensor Upgrade

This mod is meant to make your life easier when you need to couple/decouple the PTFE tube.

Bill of Material

ECAS04 PTFE connector
M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping)
M3x6 mm FHCS threading screw (one of the screws holding the stock ptfe coupler)

Print Settings

Layer height : 0.15
Wall count : 4
Top/bottom layer : 5
Infill : 30%
No support
Material : PETG minimum if inside the chamber

Change Log

30 October 2023 
First release 

❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates. 
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued. ☕ Cheers!