8 Rex optake Split
The default parameters from optake: 8 rex bore, designed for 3/16in id 3/8in od tubing, and a split design
7
231
0
957
updated August 4, 2024
Description
PDFTired of having to submit a form to gain access to optake? I'm publishing what I found to be the most common design. To use, print 2 of these optakes, and slide them on the shaft facing each other, no supports are needed!
-----------------------------------------
Recommended print settings are: PETG or ABS, .2mm layer height, 4 top and bottom layers, 3 side layers, 40% infill.
-----------------------------------------
If you want to use other configurations of this design, go to https://cad.onshape.com/documents/0267c13a508c61819e4973b4/w/670e913cf8aec1a5d4745c33/e/1dd12bd2829f9d7d9aa8783a
Tags
Model origin
The author marked this model as their own original creation.
