Modern Studio Monitor Stand

I searched for a studio monitor stand for a long time and finally saw a nice design from Grégoire Saunier, which I really liked. So with his permission I designed my own version. On the bottom side you can find a channel to route cables. So if you can/want to drill a hole in your table you can have a really clean desk setup. 

Print Settings:

• 0.2mm layer height
• infill 20%
• custom support needed for channel on the bottom side (I used a line of organic support, which worked nicely), maybe you can get away with none, depending on the material
• My stands are printed in Prusament PETG-CF but anything will work

Optional Parts:

• the bottom has four recesses for rubber feet with a diameter of 8mm

Changelog:

29-10-23 / 1.0 - upload of initial design

Credits

Big thank you for the inspiration of the design to Grégoire Saunier https://github.com/gregsaun