Smart Doorstopper (V2)

New completely reworked model with experienced features and improvements.

Print all parts from Wheel and Corpus. When printing the wheel, add the arrow to your plate with the main wheel and probably print the last two layers in a different color, which highligths the arrow. Or omit the arrow  then you have an indent arrow.

Print one part of TPU-spacers, any size.

Glue the pin into the wheel. This allows a better handling, just turn CCW to open the stopper, turn CW to close and jam the door.

TPU parts are interchangeable, check out what fits best for you.

After basic function test, you can click front and rearplate together, with the wheel inside, then use a solder iron to melt the two pins (inserted in the front plate), then use a steelball (Ø9-10) to flatten the (open) pin and connect both parts "forever"!

Due to exchangeable Spacers you can adjust the basic thing to your door(s).

All parts printed (PLA) on my MK4, except the TPU parts on my V0.1.

Explore my other Printables: https://www.printables.com/de/@Tritschi