Customisable Infill Under Desk Tray

Easy to print, customisable infill tray to store under your desk (or similar).
 

Designed to be attached using double sided tape, so you wont have to worry about damaging your precious table.

Print settings for the bars:

• Print the bars with the big flat side on the bottom.
• 2 walls
• 0.3mm layer height (0.4mm nozzle)
• 3 top/bottom solid layers
• 25% infill.

Print settings for the tray:

• 4 walls
• 0.3mm layer height (0.4mm nozzle)
• The rest is up to you!
  • 0 Top/bottom solid layers if you want a “mesh” style base.
  • 0 bottom, 3 top if you want a solid top but still want to save some filament
  • Infill pattern and density can be whatever you want
  • Keep in mind that lower infill densities will be less strong.