The Interloper - Outer Wilds (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Cobalt Blue
At layer #11 (0.96mm) swap to Sapphire Blue
At layer #14 (1.2mm) swap to Pastel Ice
At layer #21 (1.76mm) swap to White for the rest

Scaling the X and Y is fine, but do not scale the Z.