Lithium coin cell CR2032, CR2035 storage - Honeycomb wall

Inspired by the honeycomb box. They have the same height as the small box from Honeycomb box but they have a slightly bigger footprint to fit the cells. As shown in the picture, you can still put one next to a bigger box. I haven't tried placing 2 next to one another but I don't think they will fit properly.

The CR2032 is the one I used but you can print the CR2035 and any other cells with a smaller height will fit. They fit 10 cells.

I printed the casing upright on the thinner side and the drawer on the flat side without support or brim. It's around 15 grams.

Storage for lithium cell in the style of the small box.