Santa face Lightbox LED Lamp

The 3D model of a lightbox featuring Santa's jolly face is the perfect addition to your holiday decor. Santa Claus, the beloved symbol of Christmas, takes center stage in this cheerful design. With his rosy cheeks, merry eyes, and iconic white beard, Santa's face radiates the joy and magic of the holiday season. When illuminated, this lightbox creates a warm and inviting atmosphere, making it an excellent choice for spreading holiday cheer. Place it in your home, office, or as a thoughtful gift, and let Santa's face remind you of the festive spirit all year round. 🎅🌟🎁

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

- remove purge line at the beginning of the print, it may interfere, specially with bigger prints!
 

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB or go wild with RGB
            - as long as the LED density isn't too low (very few LED's per meter) you should be able to achieve a good result

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order color printing from lightest to darkest color

How to make a hole in Bambu Studio:

Assembly video: