Flex3Drive Railcore II Custom for Mosquito Hotend
Description
PDFThis pack contains my customized Flex3D mount for Railcore II.
It contains:
-G5 base with integrated mounting bracket
Allows lightening up the gantry, lower the filament path to an absolute minimum, and gain over 10mm in Z travel.
Also integrates a BL-Touch mount
-G5 Cap with extra support for the PTFE tube
-Extra high, 3-dots tension arm with 0.2mm more preload than the 2-dots one for very small filaments
-Stepper coupler with added flat for better grip on the axle with less tension on the screw
-Mosquito inserts to prevent the mount to creep into the mosquito's oblong locators when hot
-Stock G5 top, motor clamp and motor cap; just so you have them
-Custom 5150 part cooling fan shroud to accommodate for the higher nozzle
Visit https://flex3drive.com/ to get your remote extruder kit!
Print Settings
Printer:
Railcore II ZL
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.14
Infill:
25
Filament:
generic CF-PETG or PAblack
Notes:
Try to print the base, top and cap in higher resolution; I used 0.14
The tension arms can be 0.2mm, Cura's tree supports work amazingAll the remaining coupler, clamp, motor cap can be printed for strength 0.2+
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
