Voxelab Aquila X2/Spark 3D SP1 Filament Guide

Filament guide for Voxelab Aquila X2/Spark 3D SP1, to be able to connect PTFE pipe from drier box.

Print Settings

Printer:

Voxelab Aquila X2/Spark 3D SP1 

Rafts: 

No

Supports:

Yes

Resolution: 

0.2mm

Infill:

20%

Filament:

Any PLA 

Any

Notes:

I used Ultimaker cure slicer. Cubic Infill pattern and concentric supports

How I Designed This ===================

Designed Using TinkerCad

Category: 3D Printer Parts