Mini Splitter for MMU2+1s mod

This is our new MINI splitter for the mod MMU2+1s.

Recommended print settings:

• Material: PLA… but recommended PETG or ASA/ABS or resin
• 0.2 mm layer height QUALITY preset, 3 perimeters
• Infill: 20% GRID
• Position: splitter filament entry on the bed for FDM, SLA up to you

you can get mmu board firmware here:

https://github.com/Ryper3D/MMU2-1S_Firmware/releases

Needed set screw M3x3mm or larger to fix the ptfe to the splitter (one per ptfe, max. 10) and 1x M3x8mm (in SLA version) to fix holder to splitter.

Screw only for pressing pfte, not screw all the way.

https://es.aliexpress.com/item/32856334039.html

more info from MMU2+1s mod creators:

https://www.facebook.com/groups/744982719604122

Telegram Ryper3Ddesing group (spanish group):

https://t.me/RYPER3D

now .step included, feel free to improve or modify!