DAY OF THE DEAD HUEFORGE STUDY02 – 8 COLOURS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BAMBULAB BRONZE Transmission Distance: 2

PLA+ Sunlu Red Transmission Distance: 1.5

PLA BambuLab Basic Orange Transmission Distance: 5

PLA+ Sunlu Green Transmission Distance: 3

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ eSUN Light Blue Transmission Distance: 3.5

PLA+ Sunlu Pure Yellow Transmission Distance: 3.5

PLA+ Sunlu White Transmission Distance: 3

Swap Instructions:

Start with BRONZE

At layer #4 (0.4mm) swap to Red

At layer #5 (0.48mm) swap to Orange

At layer #7 (0.64mm) swap to Green

At layer #9 (0.8mm) swap to Blue

At layer #12 (1.04mm) swap to Light Blue

At layer #17 (1.44mm) swap to Pure Yellow

At layer #21 (1.76mm) swap to White for the rest.