First in Flight board game storage solution

First in Flight.  A great game with a decent insert for all of it's cards.  But, store it vertically or transport it and the cards leave their designated locations and slide around the inside of the box.

With these prints, you can keep the cards in place even when turned upside down and shaken.

We have sleeved our copy of the game, and this works with sleeved and unsleeved cards.   We also have the Kickstarter version with metal coins, extra resin player tokens and some extra pilot cards and it all fits nicely.

You will need to print: 

1 x Pilot and Descend card cover

5 x Normal card covers

1 x Short card cover

3 x Small card covers

1 x Coin box and lid

1 x token box and lid

The pilot and descend card cover doesn't have any sides as the cards are larger, but is otherwise the same as the normal card covers.

The boxes with sliding lids were created using Parametric compartment box with lid by acker and then manually adjusted.

Rest was just done quickly in Tinkercad.  

Mine was printed on an Anycubic Mega X in Ziro Dark Gray PLA as I've always found it to print well and I don't need wacky colours for an insert.