Pumpkin Basket for kids at Halloween

Here is how to print and assemble it:

THE BASKET:
Print the basket with supports painted on a third of the base - see images. That worked finde with me. You can also print it upside down, make sure you print the last quarter slower by 30%. I used PLA for the basket.
By the way, the basket is based on the model created by SpaceShipDude. You can find it here:
https://www.printables.com/model/307018-pumpkin

HANDLE & ROD: 
The other parts, since they support the weight, I recommend at least PETG and 100% infill to be on the save side. 

I recommend printing the handle upside down and in a 45° angle for all Pruse Minis. All bigger beds can print, as liked. Mini users want to add paint on supports - check out the images. 

The handle is hold in place by the rods with the little pumpkins glued to close them.
I recommend printing the rod with the head on the bed and use painted on supports, especially when you go for the rod with the support pipe. I fitted in a nail into the pipe and it works great to give some extra strength to the model. Try and test, see what nails you have laying around.  
By the way, the little pumpkin is designed by Beums and you can find it here: https://www.printables.com/model/78833-pumpkin
You will need to print the rod and the little pumpkin 2x.

If you have problems or suggestions, leave me a comment. I hope you enjoy this. 

Thx & Cheers to the two creators who designed the pumpkins used in this.

Both models were modified to make this basket possible.