Print in place hinge for small cabinet door

Print in place hinge and Bolt/nut hinge (m4 cap head bolt) for small cabinet doors. The hinge can be either bolted/screwed or glued in place.

• Bolt / nut hinge: The hinge is printed as two seperate parts. An M4x35 mm cap head bolt can be used as hinge bolt. The nut can be inserted and will stay in place for easily fixating it in place.
• Print in place hinge: The hinge can be printed in one go. After printing, the hinge might be stuck a little, but can be snapped loose quiet easily. For print settings, I would recommend to put a box modifier around the hinge and increase the amount of infill to around 50% to make that part a bit stronger. Of course, you can also choose to use 50% for the entire print.