Star Bowl i3 Edition

A dish with a ever so slightly oval bottom that transitions to a curved star made from a closed chain of cubic bezier curves. The model was sized to use almost all of the print bed on a Prusa i3MK3/S/+.

Slicing Note

For whatever reason I was unable to slice this model with PrusaSlicer 2.6.1, the program crashes every time. I was able to slice it with PrusaSlicer 2.7.0-alpha1. This was on a Windows 10 machine so if you have trouble try 2.7.0-alpha1, it saves it's config separate from 2.6.1 so you can use both.

The print in the cover photo was printed with red and gold co-extrude PLA. I used a 0.4mm nozzle with 0.2mm layer height and concentric infill.