MKS 1.4 Case

This is a quick Remix of Stage_Monkey's Tevo Tarantula Electronics Enclosure .case - RPi Edition.

The top portion is unchanged so please use Stage_Monkeys brilliant design but the main case part has been adjusted to allow an MKS 1.4 board to sit in it.

This removes the ability to use Mosfets!

I have uploaded the .step file as well for anyone who wants to do a better job, but this seems to work.

V2. Changed a lot with the various different ports for the 1.4 board. the Raspberry Pi will need to be mounted backwards as it would interfere with the drivers if not.

Added support for the 4th standoff.

Added port for usb cable

Added slots for the stepper motor cables to come out of

Changed side where RPi will come out of.

Removed un-used stand offs