IKEA IDASEN/IDÅSEN laptop holder

Super simple IKEA holder for IDASEN/IDÅSEN desk legs.

You will need:

• M8 x 80mm bolts x2
• M8 nut x2
• M8 spacers

Print out the body and bolt it down to the desk leg. To fit properly you will need your lowest desk bolt to be at the 4th position from the bottom.

Files includes 3 sheets to be printed in TPU to avoid scratching your laptop. Print them out and glue them from inside out of the holder. Or use thin foam, you do you.

Do care, the model is pretty rough, you might not be able to snap it to the leg, depending on the material used. Use a lighter to soften the leaves/sides of the holder and push into the leg of the desk.