Refrigerator Glass Shelf Support Pin

The retaining pins of the rear edge protection rail of the glass shelf of my Zanusssi refrigerator have broken off. This part can be pushed onto the glass from the side and replaces the rail.

Most likely the part fits a lot of different refrigerators of different brands (e.g. Zanussi, AEG, Ikea, Electrolux). The original part that these things replace had the part number 2631000.
If necessary, you can adjust the dimensions in the Fusion file.

The part has a small nose on the inside that engages with a groove in the glass pane. Pay attention to the alignment when printing. The model is made for the right side and must be mirrored for the left side.

I have printed the part in ABS. "Upright", i.e. with the opening with which the part would also be pushed onto the glass plate facing downwards, the part can be easily printed without support.