Jerlo

@Jerlo_15324

I developed and designed this mod to integrate a 5-inch screen on the front of my Prusa MK3 to integrate the…

In the contest Halloween theme

110

916

12 k

updated October 15, 2019

I love the look of this LCD and touchscreen cover and mount. I have my MK3s in a Lack enclosure. Would it be possible to get the 3d model files? I would like to have this setup with the Raspberry Pi mounted to the back of the screen.

Letz3D

@Letz3D

@Pierky81_16467 Perfect ;)

N 4

Niyam101

@Niyam101_57755

Where is the firmware for the screen? Also please can you send a picture of how the screen is powered (edited)

J 7

Jbmaker

@Jbmaker_86794

Bonjour, j’adore ce design! Je dispose d’un écran hyper pixel. Avez vous fait une version pour cette écran? Je vous remercie d’avance

Letz3D

@Letz3D

is there a way to fix this outside an enclosure? that would be amazing :)

E 2

eagle01

@eagle01_7631

This would save a lot of steps if you could modify the 5" screen case so you could just attach the Pi to the lcd screen. Then no need to run 26 wires from screen to Pi. (edited)

andy_burke

@andy_burke_2507

Love the style of this - have replaced the front of my BEAR with these models!

A 1

Avarax

@Avarax_65329

Can you write exactly what the LCD touch panel is?

intelli

@intelli_12771

After about a month of use, both my octoprint server and repetier server seem to crash randomly even without an open print session. Could that be a problem with my rpi3b+ itself? or could it be interference with the rambo board and all the other cables around it? ><

The worst part of all that is that when I reboot after crash, it would fail to boot into the system... I would restart it over and over many times and without knowing why it would boot in again and fail without knowing the reason why. Has anyone else experienced this problem? or do I have a bad rpi3? lol