Parameterized Vase Mode Container:Corrugated

This is a parameterized version of my Corrugated playmat tube. Releasing a parameterized version was one of my goals originally, but I abandoned it some time in the middle. I recently recieved a request for the Fusion 360 files to be able to make it in different sizes, and I decided to revisit the project and make those adjustable.

Parameters:

     nozzle size-       the diameter of the nozzle to be used; Also the desired wall thickness of                                        the finished tube.

     tube diameter-  the inside diameter of the tube

     body length-      the length of the body sections not including the connectors. The total                                          length of each section will be this value plus 31-32mm. The top sections                                        have a shorter body at 80% this value plus the connectors. The total length                                  with 3 sections will be: this value x 2.8 + 64 + (33 for Screw Top)

     tolerance-          extra space added between mating surfaces. This can be adjusted to fit                                        your printer's accuracy. The default value of 0.1mm works well on my                                              Ender 3.

The parameters are adjustable in the parameters window in Fusion 360. I checked several diameter and length combinations, and they work with out breaking anything, but some sizes could require adjustment of some operations. 

Print in vase mode with the wall width equal to your nozzle size. No bottom layers on the center section and the screw top section. The screw cap and snap top section need to be printed upside-down.

Added the ability to change the parameters for nozzle size, tube length, and tube diameter.