This is made to fit on the bottom tray of a Commercial Chef (Westinghouse WFD100W) Filament Dryer/ Food Dehydrator. Nine ¼" inch Ball Bearings roll inside a track allowing the spool resting above it to spin effortlessly. (honestly, it spins pretty well without bearings.) Pack of 100 ¼" ball bearings on Amazon for like $8.
2 Pieces (track, spinner)
Material Recommendation: Becasue this will be directly over a heating element, I recommend using a more heat-resistant material like PETG.
Print Settings:
Layer Height: .2
Wall Thickness: .8
Infill: 10% Gyroid
Supports: No
Extra: An additional spacer ring to accommodate different-sized spools can easily be made for a perfect fit.
Thanks for joining me on my first print, this is still under construction :)
The author marked this model as their own original creation.