BLINK 4 outdoor Snap on cover

<UPDATE July 2025> 

- Feel free to use the measurements, may ppl report that the motion detection and “nightvision” is not working when the cover is on. I use them as sensor detedtion in the condo with white cover and I have no issues, but i want to inform the community, its not cool to waste time and filament for something not working. At least the dimensions are fine. Hope you can use it. 

</UPDATE July 2025>

Model dimensions:
• Length: 71.4mm / 2.8 inch
• Height: 71.4mm / 1.16 inch
• Depth: 40.5mm / 1.6 inch

Print settings:
• Layer height: 0.2 mm
• Outer walls/perimeters: 1
• Bottom layers: 2
• Top layers: 2
• Infill 15% 
• No supports 
• Plate adherence: Brim