Now you can use 8.20mm fine-tipped markers in your plotter, if it uses the cutter / plotter inserts like Vevor or similar. There are thousands of these cutter / plotters sold in the US every year.
I use the markers to print large-scale pdf's on my cutter / plotter. Make sure you select the pen-tool in the setup menu right before you print in Signmaster Cut, or whichever software you are using.
You can easily set the marker depth in the plotter, and (1) 3mm screw is needed for the threaded hole to secure the marker into the adapter.
Very little cleanup was needed after printing. You will have to CA glue the three parts together before using. I used an old marker to slide them onto before gluing to keep them lined up. I printed it in PETG, but you can use whatever you want. Just keep in mind the shrinkage of the material that you are using.
The author marked this model as their own original creation.