Happy with your Prusa printer? Earn $30 when you recommend us to your friend, family or shop with the updated Prusa Rewards Program. PS: They will get an extra Prusament spool!
3D Models 3D PrintersPrusa Parts & Upgrades

Trim pieces for Original Prusa enclosure with hinged lid

0 reviews
When you add the hinged lid to the Prusa enclosure you are in fact turning the original metal lid upside down -
20
89
0
1406
updated December 1, 2023

Summary

PDF
When you add the hinged lid to the Prusa enclosure you are in fact turning the original metal lid upside down -

Tags

trimoriginalprusaenclosurehingedlid

Model origin

The author remixed this model.

Hinged lid for adding MMU2S to Original Prusa Enclosure
 by Prusa Research
 

Differences of the remix compared to the original

Update 12/2023: I added a trim piece for the front side of the lid, including Patrick Dampc's minimalistic handle.

https://www.printables.com/model/565526-original-prusa-enclosure-minimalistic-lid-handle

Also featured on the picture are MichaelQ's sliding latches - no modifications here.

https://www.printables.com/model/557120-original-prusa-enclosure-slider-lock-latch

----

When you turn the original metal lid upside down as you do when installing the hinged lid, the punched and threaded holes are showing on the outside, sticking out in a rather ugly way.

The trim pieces cover up the threads in the back and on the sides. I added all (five) necessary pieces to one print plate. You need 10 bolts M3 x 6mm to attach these, making sure the bolts don't stick out at the bottom.

License