Lee Single Case Feed and Funnel

This is a single tube case feed adapter and funnel that allows you to easily add cases to a lee press.

I didn't really like the short quad tube thing that came with the pro1000 and adding 223 and 300blk cases to the tubes with the collator was kind of a pain so I made this. I bought a long stick of aquarium tube and made the case feeder and slip on funnel that makes it easier to drop cases into he tube quickly.

It should use the same size bolts and nuts as the standard lee one, and adjusts in the same manner.

Apparently my printer isn't super great at holes so I made three feed orifice sizes. The small one fits 223/300blk/380, mid fits 9mm, and larger fits 40S&W.

Added the tube coupler from on of my other designs if you can't find longer tubing.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

40

Filament: 3DSolutech PLA Red

Notes:

Should print fine with no support. I used 40% cubic infill in prusaslicer and turn off thin walls to get better definition around the bolt retainer.

The tube is held in by three little nubs and was very tight for me. You can probably use a knife or something to knock them down if you can't get the tube in. I also had to chamfer and deburr the end of the clear tube to get it in easily.

How I Designed This

As always, poorly in Tinkercad