Lee Inverse Threaded Single Case Feed, Tube Coupler, and Funnel

This version has a threaded base that lets you unscrew the tube if you need to remove cases or store the press, but this time the sized orifices are on the tube side so you can change sizes without having to disassemble the mounting bracket. I don't know why I didn't do it this way to begin with. Also I added a coupler to put the feed tubes back to back since I couldn't find any more long single piece 9/16 thin wall aquarium tube.

This is a single tube case feed adapter and funnel that allows you to easily add cases to a lee press.

I didn't really like the short quad tube thing that came with the pro1000 and adding 223 and 300blk cases to the tubes with the collator was kind of a pain so I made this. I bought a long stick of aquarium tube and made the case feeder and slip on funnel that makes it easier to drop cases into he tube quickly.

It should use the same size bolts and nuts as the standard lee one, and adjusts in the same manner.

Apparently my printer isn't super great at holes so I made three feed orifice sizes. The small one fits 223/300blk/380, mid fits 9mm, and larger fits 40S&W.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.12 - 0.2

Infill:

40

Filament: 3dSolutech PLA Grey, Red, Pink, Black, Clear

Notes:

I do sequential printing which seems to help with dimensional fit.