This insert fits the Ark Nova base game and Marine Worlds expansion.
In the pictures we've used alternate money tokens.
Update Nov 9 2023: added sleeve_holder_2_v2 as replacement for card_holder_2 if you sleeve your cards.
Update Nov 11 2023:
- Updated player_tokens to v2 so there is enough room for sleeved cards.
- Added player_tiles_alt that will fit all standard building tiles, replacing only one of the player_tiles if you already printed them will give enough room for the remaining tiles.
- Added unique_buildings_4_alt with room for two small stacks of sleeved cards instead of 4 compartments for tiles - in case your sleeved cards only just fit in the card holders.
You'll need the following parts:
- 2x card_holder_2: container for two stacks of cards
fits unsleeved cards or DragonShield perfect fit - or 2x sleeve_holder_2_v2: container for two stacks of sleeved cards
fits sleeves with outer size of max 6,7 x 9,2 cm, confirmed with Arcane Tinmen standard and Sleeve Kings - 2x card_divider: for between base conservation, end goals and action cards
print a third one if you store the basic action cards in the central stack as well - 4x player_tokens_alt: holds the personal player's tokens, can hold the players basic action cards (supports sleeved cards)
- 2x player_storage: holds money, x-tokens and 2x tokens for one side of the table.
use player_storage_alt (2x) instead if you need an extra compartment (for other types of money e.g.) - 2x player_tiles: holds standards enclosures for one side of the table (two 2-size, one 3-size, one 4-size enclosure don't fit, can be saved in unique_buildings_4 as in the images).
use player_tiles_alt if you want to fit all tiles (2x, or 1 regular and 1 alt) - 1x unique_buildings_1: holds one third of the unique buildings
- 1x unique_buildings_2: holds one third of the unique buildings
- 1x unique_buildings_3: holds one third of the unique buildings
- 1x unique_buildings_4: fills up space, has 4 generic compartments for anything you like
or unique_buildings_4_alt: room for two small stacks of sleeved cards - 1x conservation_tiles: holds universities and continents for setup and during game
- 1x special_buildings: holds special buildings for during the game
- 1x setup_bonuses: hold setup tiles, coffee mug, interaction tokens and room for other items
- 1x setup_solo: holds the solo tiles
Support: player_storage(_alt), unique_building_3 and unique_building_4(_alt) might need support depending on your printer because of the inset bottom for stackability.
Make sure the bottom corners of unique_buildings 1 to 4 don't warp as they stack into each other with small pins and holes.
Some inspiration from the insert we used previously for just the base game by iMats: https://www.printables.com/model/201620-ark-nova-boardgame-insert
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.16mm
Infill:
15%
Filament: Jupiter PLA Light blue
Category: Games