Update: Der erste Teil “FilamentBunker Halter Part 1” wurde um 3mm verkleinert bitte V2 verwenden.
Ich habe die Filament Bunker von marsgizmo https://thangs.com/designer/marsgizmo/3d-model/marsgiz gedruckt und musste feststellen das diese sich beim drucken direkt aus der Box, die Box immer näher zum Drucker wandern. Damit die Boxen einen sicheren Stand haben hab ich den in der länge bis zu 3 cm flexiblen Halter erstellt. Der halter kann mit M3 Schrauben auf einer Unterlage befestigt werden.
Das Model besteht aus zwei Teilen beide Teile werden benötigt.
Gedruckt wurde es mit PLA+ und 8% infill. Es sollte aber auch jedes andere Filament gehen, welche aber nicht getestet wurden.
Vorschläge oder Änderungen zur Verbesserung des Modells sind willkommen.
I have printed the filament bunker from marsgizmo https://thangs.com/designer/marsgizmo/3d-model/marsgiz unfortunatley the box moves to close to the printer during printing directly from the box. In order to keep the box in its place I created a bracket with can be extended up to 3cm. A M3 screw can be used to fix the bracket on a base.
The model consist of two parts and both are required.
Printet with PLA+ and 8% infill. Other filaments can be used but not tested.
Changed or suggestions to improve the model are welcome.
The author marked this model as their own original creation.