TINY_RACK EURORACK CASE (WITH POWER PCB)

tiny_rack is a eurorack rack project for DIYer with just starting DIY eurorack modular synthesizers.

See full project (with power pcb) here: 
https://github.com/KevinKeWang/tiny_rack

- One-piece 3D printed, no splicing, no metal rails required.
- Maximum current: +12V 1500mA, -12V 1500mA, +5V 6500mA.
- Optional +3.3V 500mA for easy project prototyping.
- Full load tested.
- The +12V and -12V output ripple is less than 100mV under all load conditions.
- Exposed M3 screw terminals for direct connection to the test power supply. Clamps can be directly.