Hörmann RS485 Bridge v1.2 Enclosure

This is a WIP to create an enclosure for @Tysonpower's DIY Hörmann RS485 Bridge v1.2 (HCP Emulator) PCB.

Model was designed for tight fit, your printer must be correctly calibrated or parts might not fit.

Enclosure characteristics:

• Cutouts for all Expansion Ports but the RJ12 Breakout.
• Button pillar to allow pressing the BOOT buton without removing the lid
• Thiny holes with light guides for onboard leds.
• USB-C cutout on the side.

Print settings:

• Nozzle diameter: 0,40 (E3D Revo)
• Rafts: No
• Supports: No
• Layer height: 0.2
• Infill: 30%