3D printable Micromouse labyrinth Walls & Connectors.

I created a maze solver bot (aka micromouse) for the contest at 2017 OSHWDem held at La Coruña. To test the bot, a maze with actual dimmensions is mandatory so I've created this parts.

• Micromouse_Maze_Wall.stl -> Generic wall of 170mm12mm50mm (LWH) (full lengt: 174.50mm*12mm)
• Micromouse_Maze_Conector_60mm.stl -> Wall connector to be inserted in a square hole of 12*12. it is 60mm tall: 50mm to held the wall and 10mm to be inserted in a 10mm board.
• Micromouse_Maze_Conector_60mm_Round_Plug.stl.stl -> Wall connector to be inserted in a round hole of 7mmØ hole.it's 60mm tall: 50mm to held the wall and 10mm to be inserted in a 10mm board. Micromouse_Maze_Conector_50_Screwable.stl -> 50mm coneector with a 3mm hole (15mm deep) hole to be screwed to the board.

If you think it deserves downloading... Please leave a Like!

Be proud, Show your makes!

Category: Robotics