Hand Organizer (USB and SD/microSD)

Introduction

This is one of many ways to storage your SD/microSD or USB-Flash-Drive in a fancy way. But you are free to use the bowl for something else. 

Thanks a lot for the great design of the elements I use :)

GCode
Is created for the PursaMiniPlus, with the new alpha version for the firmware (including the Input Shaper). It worked quite well :) 

Filament
Mainparts: eSun 1,75mm - ePLA-Matte, White
Bowl and SDCards-Sockets: PLA 1,75mm - Das Filament, Königsblau
Or you choose your own color

STL-Files
Hand_Top and Hand_Bottom → PrusaMiniPlus
Hand_Join → for bigger Printers
The others Files can handle every printer 

Combining
The Hand Object don't need SuperGlue, but I recommend it for the SD/microSD Sockets  

Support
Not needed

Infill
Between 5-10%, https://help.prusa3d.com/de/article/infill-muster_177130

Happy printing :)
I am looking forward to see some makes and what you use the bowl at the top for!

In case you need help or have a question? Please contact me.

Last Note: For better access you can take the bowl down and up, when you don't use SuperGlue there ;)  

I created sockets for the sd card slots and change the scale of the bowl for better fitting.